1 06-2011, rev. 0611 www.te.com ? 2011 tyco electronics corporation, a te connectivity ltd. company. datasheets and product specifcation ac - cording to iec 61810-1 and to be used only together with the defnitions section. datasheets and product data is subject to the terms of the disclaimer and all chapters of the defnitions section, available at http://relays.te.com/definitions datasheets, product data, defnitions sec - tion, application notes and all specifcations are subject to change. n pin assignment similar to iso 7588 part 1 n plug-in terminals n customized versions on request C 24vdc versions with contact gap >0.8mm C integrated components (e.g. resistor, diode) C customized marking/color C special covers (e.g. notches, release features, brackets) C various contact arrangements and materials typical applications cross carline up to 35a for example: rear window defogger, battery disconnection, power distribution (clamp 15) contact data 1 a 1 a 1 c 1 c contact arrangement 1 form a, 1 form a, 1 form c, 1 form c, 1 no 1 no 1 co 1 co rated voltage 12vdc 24vdc 12vdc 24vdc limiting continuous current form a/form b (no/nc) 23c 50a 50a 50/35a 50/35a 85c 35a 35a 35/25a 35/25a 125c 15a 15a 15/10a 15/10a limiting making current 1) a/b (no/nc) 120a 120a 120/45a 120/45a limiting breaking current, a/b (no/nc) 30a 20a 30/20a 20/10a limiting short-time current overload current, iso 8820-3 2) 1.35 x 35a, 1800s 2.00 x 35a, 5s 3.50 x 35a, 0.5s 6.00 x 35a, 0.1s jump start test, iso 16750-1 24vdc for 5min, conducting nominal current at 23c contact material silver based min. recommended contact load 3) 1a at 5vdc initial voltage drop, at 10a, typ./max. form a (no) 15/300mv 15/300mv 15/300mv 15/300mv form b (nc) - - 20/300mv 20/300mv frequency of operation, at nominal load 6 ops./min (0.1hz) operate/release time typ. 10/10ms 4) electrical endurance, ops. resistive load, a (no) >2.5x10 5 >2.5x10 5 >2.5x10 5 >2.5x10 5 30a, 20a, 30a, 20a, 14vdc 28vdc 14vdc 28vdc resistive load, b (nc) - - >1x10 5 >2.5x10 5 20a, 10a, 14vdc 28vdc mechanical endurance typ. 1x10 6 ops. 1) the values apply to a resistive or inductive load with suitable spark suppression and at maximum 14vdc for 12vdc or 28vdc for 24vdc load voltages. for a load current duration of maximum 3s for a make/break ratio of 1:10. 2) current and time are compatible with circuit protection by a typical automotive fuse. relay will make, carry and break the specifed current. 3) see chapter diagnostics of relays in our application notes or consult the internet at http://relays.te.com/appnotes/ 4) for unsuppressed relay coil. a low resistive suppression device in parallel to the relay coil increases the release time and reduces the lifetime caused by increased erosion and/or higher risk of contact tack welding. coil data rated coil voltage 12/24vdc coil versions, dc coil coil rated operate release coil rated coil code voltage voltage voltage resistance 5) power 5) vdc vdc vdc ?10% w 001 12 8 1.5 85 1.7 002 12 6.5 1 75 1.9 004 24 16 3 255 2.3 5) without components in parallel. all fgures are given for coil without pre-energization, at ambient temperature +23c. insulation data initial dielectric strength between open contacts 500v rms between contact and coil 500v rms between adjacent contacts 500v rms load dump test iso 7637-1 (12vdc), test pulse 5 v s =+86.5vdc iso 7637-2 (24vdc), test pulse 5 v s =+200vdc other data eu rohs/elv compliance compliant protection to heat and fre according ul94 hb or better 6) ambient temperature -40 to 125c climatic cycling with condensation, en iso 6988 6 cycles, storage 8/16h temperature cycling, iec 60068-2-14, nb 10 cycles, -40/+85c (5c/min) damp heat cyclic, iec 60068-2-30, db, variant 1 6 cycles, upper air temp. 55c damp heat constant, iec 60068-2-3, ca 56 days category of environmental protection, iec 61810 rt i C dustproof degree of protection, iec 60529 ip54 corrosive gas iec 60068-2-42 102cm 3 /m 3 so 2 , 10 days iec 60068-2-43 10.3cm 3 /m 3 h 2 s, 10 days vibration resistance (functional) iec 60068-2-6 (sine sweep) 10 to 500hz, min. 5g 7) shock resistance (functional) iec 60068-2-27 (half sine) 11ms, min. 20g 7) drop test, free fall, iec 60068-2-32 1m onto concrete power relay b automotive relays plug-in mini iso relays f234_fcw1_bw
2 06-2011, rev. 0611 www.te.com ? 2011 tyco electronics corporation, a te connectivity ltd. company. datasheets and product specifcation ac - cording to iec 61810-1 and to be used only together with the defnitions section. datasheets and product data is subject to the terms of the disclaimer and all chapters of the defnitions section, available at http://relays.te.com/definitions datasheets, product data, defnitions sec - tion, application notes and all specifcations are subject to change. power relay b (continued) automotive relays plug-in mini iso relays other data (continued) terminal type plug-in, qc cover retention axial force 150n pull force 200n push force 200n terminal retention 8) pull force 100n push force 100n resistance to bending 10n force applied to side 10n torque 0.3nm weight approx. 35g (1.2oz) packaging unit 200 pcs. 6) refers to used mateials. 7) no change in the switching state >10s. valid for nc contacts, no contact values signifcantly higher. 8) values apply 2mm from the end of the terminal. when the force is removed, the terminal must not have moved by more than 0.3mm. accessories for details see datasheet connectors for mini iso relays no 1 form a, no 87 30 86 85 nor 1 form a, no with resistor 87 30 86 85 no_2x87 1 form a, 1 no (2x87) 87 87 30 86 85 terminal assignment nor_2x87 1 form a, 1 no (2x87) with resistor 87 87 30 86 85 nod_2x87 1 form a, 1 no (2x87) with diode 87 87 30 86 85 co 1 form c, co 87 87a 30 86 85 cor 1 form c, co with resistor 87 87a 30 86 85 cod 1 form c, co with diode 87 87a 30 86 85
3 06-2011, rev. 0611 www.te.com ? 2011 tyco electronics corporation, a te connectivity ltd. company. datasheets and product specifcation ac - cording to iec 61810-1 and to be used only together with the defnitions section. datasheets and product data is subject to the terms of the disclaimer and all chapters of the defnitions section, available at http://relays.te.com/definitions datasheets, product data, defnitions sec - tion, application notes and all specifcations are subject to change. power relay b (continued) automotive relays plug-in mini iso relays view of the terminals (bottom view) 0.2 0.2 0.2 0.25 0.3 16.8 30 87a 86 7.9 8.35 85 17.9 87 2.6 0.2 0.2 0.2 0.2 5 0.3 16.8 7.9 8.35 17. 9 2.6 30 86 85 87 87 0.2 0.2 0.25 0.3 16.8 8.35 17.9 2.6 86 30 85 87 1 form c 1 form a is without 87a 1 form a (2x87) 1 form a non iso (terminals 30 and 86 changed position) 234_vt1 234_vt2 234_vt3 measurement referencep lane 25.3 11 ,5 -1 -0,6 0.3 5x 234-nb_dd1 dimensions 0.3 0.3 6 0.5 0.2 0.1 0.3 10 87 1.7 87a 26 86 11 ,5 5.4 -1 85 4 -1 22 28.5 -0,8 -1 30 28,5 0.3 5x measurement referencep lane 234-b_dd1 shown is 1 form c 1 form a is without terminal 87a power relay b with bracket power relay b without bracket
4 06-2011, rev. 0611 www.te.com ? 2011 tyco electronics corporation, a te connectivity ltd. company. datasheets and product specifcation ac - cording to iec 61810-1 and to be used only together with the defnitions section. datasheets and product data is subject to the terms of the disclaimer and all chapters of the defnitions section, available at http://relays.te.com/definitions datasheets, product data, defnitions sec - tion, application notes and all specifcations are subject to change. power relay b (continued) automotive relays plug-in mini iso relays product code arrangement cover coil suppr. circuit 1) coil cont. material terminals part number v23234-a0001-x032 1 form c, standard resistor 680? cor 12vdc silver based plug-in, qc 1-1904020-2 v23234-a0001-x038 1 co diode (cathode 86) cod 1-1904020-5 v23234-a0001-x040 co 4-1904020-7 v23234-a0004-x055 24vdc 2-1904025-6 v23234-a0004-x051 diode (cathode 86) cod 2-1904025-3 v23234-a0004-x053 resistor 1400? cor 2-1904025-5 v23234-a1001-x033 bracket resistor 680? 12vdc 1-1904022-1 v23234-a1001-x036 co 3-1904022-2 v23234-a1001-x041 diode (cathode 86) cod 2-1904022-3 v23234-a1004-x050 co 24vdc 1-1904027-1 v23234-a1004-x054 resistor 1400? cor 3-1904027-2 v23234-b0001-x001 1 form a, standard resistor 680? nor 12vdc 5-1904006-1 v23234-b0002-x012 1 no no 1-1904008-2 v23234-b1001-x004 bracket resistor 680? nor 1-1904007-1 v23234-b1001-x010 no 1-1904007-2 v23234-c0001-x003 1 form a, standard diode (cathode 86) nod_2x87 2-1904011-1 v23234-c0001-x006 1 no (2x87) no_2x87 2-1904011-2 v23234-c0004-x018 resistor 1400? nor_2x87 24vdc 2-1904015-1 v23234-c0004-x020 no_2x87 1-1904015-3 v23234-c1001-x005 bracket 12vdc 5-1904012-1 v23234-c1004-x017 24vdc 5-1904014-1 v23234-c1004-x085 resistor 1400? nor_2x87 1904015-5 v23234-k1001-x024 1 form a, 1 no resistor 680? nor (non iso) 12vdc plug-in, qc /non iso 5-1904018-1 1) see terminal assignment diagrams. other types on request. this list represents the most common types and does not show all variants covered by this datasheet. product code structure typical product code v23234 -a 0 001 -x040 type v23234 power relay b contact arrangement a 1 form c, 1 co b 1 form a, 1 no c 1 form a, 1 no (2x87) k 1 form a, 1 no (non iso) cover 0 standard 1 bracket near terminal 30 iso coil 001 12vdc 002 12vdc 004 24vdc terminal/arrangement xnnn customized (nnn: version number)
|
